Gun Bans? Then Make Your Own!
Gun Bans? Then Make Your Own!
Minimum tools required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. Electric Drill or Drill Press.
2. Drill Bits 1.5 to 9mm Diameter.
3. Hacksaw.
4. Angle Grinder.
6. Bench Grinder.
7. Hammer.
8. Set square.
9. 14.2mm (9/16) Taper Pin Reamer.
10. Taper Cutting Tool.
11. Countersink Tool.
12. Large Vice.
Tubes required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 30x30x2mm Upper Receiver
2. 30x30x.16mm Lower Receiver
3. 14.29x3.25mm Barrel (SMT)*
4.12.70x2.03mm Breech Block (SMT/SHT/ERW)*
5. 25.40x12.70x1.6mm Magazine
6. 12.70x0.91mm Magazine
7. 34.93x15.88x1.6mm Magazine Well
8. 40x20x1.6mm Grip
9. 50.80x1.6mm Trigger Guard
* Seamless Mechanical / Seamless Hydraulic/ Electric Resistance Welded.
Other materials required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 3"x2"x1/8" Steel Plate Trigger.
2. 10mm Hexagon Wrench/Key Sear.
3. 1/2 Shalf Lock Collars x 14.
6. 5.5mm dia' Steel Rod x24" long (or 7/32")
7. 19.05x5mm Flat Bar x 25" long (or 3/4x3/16)
8. 3mm dia' Steel Rod x 5 1/2" long (or 1/8")
9. 9.5X1.6mm Steel Strip (Sheet) x 6" long (or 3/8" x 1/16")
10. 19.05 x 9.5 Flat Bar x 9" long (or 3/4 x 3/8")
11. 20 Gauge Piano Wire (Music Wire) Purchase several rolls.
12. 18 Gauge x 7/16" Spring Steel Strip, 12" long.
13. 20 Gauge x 1/2" Spring Steel Strip, 8" long.
14. 6mm dia' Socket Screws (x11) 9mm long (or 1/4" x 3/8")
http://www.instructables.com/id/25MM-Pneumatic-Sniper-Rifle/
!!!
http://www.xinventions.com/main/spud/home.htm
A homemade SMG in action:
https://www.youtube.com/watch?v=Dj6VfXDq0qY
https://www.youtube.com/watch?v=ZWVh5iJEi_8
http://www.instructables.com/group/homemadeguns/?show=INSTRUCTABLES...
http://demonoid.cc/files/?category=11&subcategory=0&languag...
OR
http://demonoid.cc/files/?category=6&seeded=0&external=2&am...
http://www.ronpaulforums.com/showthread.php?p=1932940
http://www.scribd.com/doc/4483892/Weapons-Expedient-Homemade-Arms-T...
http://www.abovetopsecret.com/forum/thread342215/pg1
http://isohunt.com/torrent_details/13431221/Homemade+Weapons?tab=su...
http://www.roguesci.org/theforum/archive/index.php/f-10.html
Minimum tools required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. Electric Drill or Drill Press.
2. Drill Bits 1.5 to 9mm Diameter.
3. Hacksaw.
4. Angle Grinder.
6. Bench Grinder.
7. Hammer.
8. Set square.
9. 14.2mm (9/16) Taper Pin Reamer.
10. Taper Cutting Tool.
11. Countersink Tool.
12. Large Vice.
Tubes required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 30x30x2mm Upper Receiver
2. 30x30x.16mm Lower Receiver
3. 14.29x3.25mm Barrel (SMT)*
4.12.70x2.03mm Breech Block (SMT/SHT/ERW)*
5. 25.40x12.70x1.6mm Magazine
6. 12.70x0.91mm Magazine
7. 34.93x15.88x1.6mm Magazine Well
8. 40x20x1.6mm Grip
9. 50.80x1.6mm Trigger Guard
* Seamless Mechanical / Seamless Hydraulic/ Electric Resistance Welded.
Other materials required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 3"x2"x1/8" Steel Plate Trigger.
2. 10mm Hexagon Wrench/Key Sear.
3. 1/2 Shalf Lock Collars x 14.
6. 5.5mm dia' Steel Rod x24" long (or 7/32")
7. 19.05x5mm Flat Bar x 25" long (or 3/4x3/16)
8. 3mm dia' Steel Rod x 5 1/2" long (or 1/8")
9. 9.5X1.6mm Steel Strip (Sheet) x 6" long (or 3/8" x 1/16")
10. 19.05 x 9.5 Flat Bar x 9" long (or 3/4 x 3/8")
11. 20 Gauge Piano Wire (Music Wire) Purchase several rolls.
12. 18 Gauge x 7/16" Spring Steel Strip, 12" long.
13. 20 Gauge x 1/2" Spring Steel Strip, 8" long.
14. 6mm dia' Socket Screws (x11) 9mm long (or 1/4" x 3/8")
http://www.instructables.com/id/25MM-Pneumatic-Sniper-Rifle/
!!!
http://www.xinventions.com/main/spud/home.htm
A homemade SMG in action:
https://www.youtube.com/watch?v=Dj6VfXDq0qY
https://www.youtube.com/watch?v=ZWVh5iJEi_8
http://www.instructables.com/group/homemadeguns/?show=INSTRUCTABLES...
http://demonoid.cc/files/?category=11&subcategory=0&languag...
OR
http://demonoid.cc/files/?category=6&seeded=0&external=2&am...
http://www.ronpaulforums.com/showthread.php?p=1932940
http://www.scribd.com/doc/4483892/Weapons-Expedient-Homemade-Arms-T...
http://www.abovetopsecret.com/forum/thread342215/pg1
http://isohunt.com/torrent_details/13431221/Homemade+Weapons?tab=su...
http://www.roguesci.org/theforum/archive/index.php/f-10.html
Replies to This Discussion
-
Permalink Reply by TheLasersShadow on
-
**smacks head** in America you shouldn't ever have to consider this due to availability... as well as knowing that a good dry wall hammer or a knife are easily bought at a store.
-
-
Permalink Reply by Joe Green on
-
My brother-in-law is an expert gunsmith and has built several guns. I am hoping I can get him to build a 50 Cal. rifle, here in Arizona.
-
-
Permalink Reply by youhavetoforgiveme on
-
1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat. -
-
Permalink Reply by Billy1st III% on
-
Is doable!
youhavetoforgiveme said:1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat. -
-
Permalink Reply by Che Lenin on
-
Yea well in canada they are making it difficult to obtain even just a hunting rifle.
-
-
Permalink Reply by Metalchemist on
-
Don't forget about all the great throwing axes available now.
A bit of practice (as in just about everything) and you're more than competant.
-
-
Permalink Reply by Cryptocurrency on
-
Wooohoooo!! WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!!!
-
-
Permalink Reply by Mr Chicken on
-
Imagine what a self contained nail gun will go for when the fit hits the shan... Adjust the trigger guard and you have a nice nail shooter. Who hasn't played with their own framing nail gun?
-
-
Permalink Reply by david james on
-
All significant links deleted or disabled.
-
-
Permalink Reply by Less Prone on
-
Expedient firearms
-
"Destroying the New World Order"
THANK YOU FOR SUPPORTING THE SITE!
Latest Activity
- Top News
- Everything
Three Must See Movies for Halloween
Grab Your Popcorn and Settle In! If you really want to get in the mood for Halloween and you like…See More
Terror on All Hallows Eve
Chapter IElizabeth was angry. All of her friends were going to be out on Halloween, but her. She…See More
How Corporations Are Secretly Poisoning Our Food Supply
Dupont and 3M have been secretly poisoning America for decades. PFAs — also known as forever chemicals—are now in our food, water, clothes, and our blood. Th...
They Won’t Stop
The demonically driven left will not stop. Makes no difference how much violence they call for or…See More
What US Scientist unwittingly helped the Nazis devise the V-2 Missile?
In the early 1920’s and leading up to World War II German technology outpaces the peace time…See More
"cheeki kea That's very interesting history. So many things about history that go ignored or…"
Programmed To Kill/Satanic Cover-Up Part 433 (The Charlie Kirk Conspiracy Show)
https://www.programmedtokill.net/projects---- DISCLAIMER! ----Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair u...
American werewolf- 2018
"Yip I've looked again and this is what the creature looks like, even has stripes just like…"
© 2025 Created by truth.
Powered by
