Gun Bans? Then Make Your Own!
Gun Bans? Then Make Your Own!
Minimum tools required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. Electric Drill or Drill Press.
2. Drill Bits 1.5 to 9mm Diameter.
3. Hacksaw.
4. Angle Grinder.
6. Bench Grinder.
7. Hammer.
8. Set square.
9. 14.2mm (9/16) Taper Pin Reamer.
10. Taper Cutting Tool.
11. Countersink Tool.
12. Large Vice.
Tubes required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 30x30x2mm Upper Receiver
2. 30x30x.16mm Lower Receiver
3. 14.29x3.25mm Barrel (SMT)*
4.12.70x2.03mm Breech Block (SMT/SHT/ERW)*
5. 25.40x12.70x1.6mm Magazine
6. 12.70x0.91mm Magazine
7. 34.93x15.88x1.6mm Magazine Well
8. 40x20x1.6mm Grip
9. 50.80x1.6mm Trigger Guard
* Seamless Mechanical / Seamless Hydraulic/ Electric Resistance Welded.
Other materials required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 3"x2"x1/8" Steel Plate Trigger.
2. 10mm Hexagon Wrench/Key Sear.
3. 1/2 Shalf Lock Collars x 14.
6. 5.5mm dia' Steel Rod x24" long (or 7/32")
7. 19.05x5mm Flat Bar x 25" long (or 3/4x3/16)
8. 3mm dia' Steel Rod x 5 1/2" long (or 1/8")
9. 9.5X1.6mm Steel Strip (Sheet) x 6" long (or 3/8" x 1/16")
10. 19.05 x 9.5 Flat Bar x 9" long (or 3/4 x 3/8")
11. 20 Gauge Piano Wire (Music Wire) Purchase several rolls.
12. 18 Gauge x 7/16" Spring Steel Strip, 12" long.
13. 20 Gauge x 1/2" Spring Steel Strip, 8" long.
14. 6mm dia' Socket Screws (x11) 9mm long (or 1/4" x 3/8")
http://www.instructables.com/id/25MM-Pneumatic-Sniper-Rifle/
!!!
http://www.xinventions.com/main/spud/home.htm
A homemade SMG in action:
https://www.youtube.com/watch?v=Dj6VfXDq0qY
https://www.youtube.com/watch?v=ZWVh5iJEi_8
http://www.instructables.com/group/homemadeguns/?show=INSTRUCTABLES...
http://demonoid.cc/files/?category=11&subcategory=0&languag...
OR
http://demonoid.cc/files/?category=6&seeded=0&external=2&am...
http://www.ronpaulforums.com/showthread.php?p=1932940
http://www.scribd.com/doc/4483892/Weapons-Expedient-Homemade-Arms-T...
http://www.abovetopsecret.com/forum/thread342215/pg1
http://isohunt.com/torrent_details/13431221/Homemade+Weapons?tab=su...
http://www.roguesci.org/theforum/archive/index.php/f-10.html
Minimum tools required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. Electric Drill or Drill Press.
2. Drill Bits 1.5 to 9mm Diameter.
3. Hacksaw.
4. Angle Grinder.
6. Bench Grinder.
7. Hammer.
8. Set square.
9. 14.2mm (9/16) Taper Pin Reamer.
10. Taper Cutting Tool.
11. Countersink Tool.
12. Large Vice.
Tubes required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 30x30x2mm Upper Receiver
2. 30x30x.16mm Lower Receiver
3. 14.29x3.25mm Barrel (SMT)*
4.12.70x2.03mm Breech Block (SMT/SHT/ERW)*
5. 25.40x12.70x1.6mm Magazine
6. 12.70x0.91mm Magazine
7. 34.93x15.88x1.6mm Magazine Well
8. 40x20x1.6mm Grip
9. 50.80x1.6mm Trigger Guard
* Seamless Mechanical / Seamless Hydraulic/ Electric Resistance Welded.
Other materials required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2
1. 3"x2"x1/8" Steel Plate Trigger.
2. 10mm Hexagon Wrench/Key Sear.
3. 1/2 Shalf Lock Collars x 14.
6. 5.5mm dia' Steel Rod x24" long (or 7/32")
7. 19.05x5mm Flat Bar x 25" long (or 3/4x3/16)
8. 3mm dia' Steel Rod x 5 1/2" long (or 1/8")
9. 9.5X1.6mm Steel Strip (Sheet) x 6" long (or 3/8" x 1/16")
10. 19.05 x 9.5 Flat Bar x 9" long (or 3/4 x 3/8")
11. 20 Gauge Piano Wire (Music Wire) Purchase several rolls.
12. 18 Gauge x 7/16" Spring Steel Strip, 12" long.
13. 20 Gauge x 1/2" Spring Steel Strip, 8" long.
14. 6mm dia' Socket Screws (x11) 9mm long (or 1/4" x 3/8")
http://www.instructables.com/id/25MM-Pneumatic-Sniper-Rifle/
!!!
http://www.xinventions.com/main/spud/home.htm
A homemade SMG in action:
https://www.youtube.com/watch?v=Dj6VfXDq0qY
https://www.youtube.com/watch?v=ZWVh5iJEi_8
http://www.instructables.com/group/homemadeguns/?show=INSTRUCTABLES...
http://demonoid.cc/files/?category=11&subcategory=0&languag...
OR
http://demonoid.cc/files/?category=6&seeded=0&external=2&am...
http://www.ronpaulforums.com/showthread.php?p=1932940
http://www.scribd.com/doc/4483892/Weapons-Expedient-Homemade-Arms-T...
http://www.abovetopsecret.com/forum/thread342215/pg1
http://isohunt.com/torrent_details/13431221/Homemade+Weapons?tab=su...
http://www.roguesci.org/theforum/archive/index.php/f-10.html
Replies to This Discussion
-
Permalink Reply by TheLasersShadow on
-
**smacks head** in America you shouldn't ever have to consider this due to availability... as well as knowing that a good dry wall hammer or a knife are easily bought at a store.
-
-
Permalink Reply by Joe Green on
-
My brother-in-law is an expert gunsmith and has built several guns. I am hoping I can get him to build a 50 Cal. rifle, here in Arizona.
-
-
Permalink Reply by youhavetoforgiveme on
-
1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat. -
-
Permalink Reply by Billy1st III% on
-
Is doable!
youhavetoforgiveme said:1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat. -
-
Permalink Reply by Che Lenin on
-
Yea well in canada they are making it difficult to obtain even just a hunting rifle.
-
-
Permalink Reply by Metalchemist on
-
Don't forget about all the great throwing axes available now.
A bit of practice (as in just about everything) and you're more than competant.
-
-
Permalink Reply by Cryptocurrency on
-
Wooohoooo!! WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!!!
-
-
Permalink Reply by Mr Chicken on
-
Imagine what a self contained nail gun will go for when the fit hits the shan... Adjust the trigger guard and you have a nice nail shooter. Who hasn't played with their own framing nail gun?
-
-
Permalink Reply by david james on
-
All significant links deleted or disabled.
-
-
Permalink Reply by Less Prone on
-
Expedient firearms
-
"Destroying the New World Order"
THANK YOU FOR SUPPORTING THE SITE!
Latest Activity
- Top News
- Everything
The Unnerving Frequency of Disappearances on the Appalachian Trail Pt. 1
There’s another one of the cluster zones of missing persons reports that fails to render the…See More
$ Paid Annual Leave $
"Now is the Time for American Workers to Unite! Take back the squandered taxes and demand time off…"
Mystery illness strikes Russia with fever, blood symptoms, and no cure in sight.
I guess releasing this bio-weapon upon Israeli neighbors would be hitting too close to home. I…See More
The Electric State | Final Trailer | Netflix
Together, robots & humans can take the whole system down. THE ELECTRIC STATE starring Millie Bobby Brown, Chris Pratt and directed by the Russo Brothers, onl...
"Mommy Tells Me I'm a Girl"-Jeff Younger
Soft White Underbelly interview and portrait of Jeff Younger, a father who is fighting to protect his son from transitioning into a girl. Get 40% off access ...
MindWar: Full Spectrum Cognitive Dominance [Michael Aquino Analysis]
This is my analysis and my thoughts on Michael Aquino's "MindWar". This document is a must-read if you are looking to understand the psyop tactics and cognit...
A Horrid Murder at Land Between the Lakes (Sasquatch?)
Most of us hear that Sasquatch-Bigfoot are intelligent yet reclusive creatures that are closely…See More
Metropolis (1927) Full Movie | 4K Color Remastered: 2023 Colorized with Gottfried Huppertz Score
"Hey thanks for the thumbs up guys. I was blown away (like a leaf in a tornado) when I watched this…"
Did you know this? I was SHOCKED!
Wounder how many people know what they do to baby chicks? Wounder if they know what the are doing to Salmon? What about the lettuce and tomatoes? This will n...
© 2025 Created by truth.
Powered by
