Gun Bans? Then Make Your Own!

Gun Bans? Then Make Your Own!

Minimum tools required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2

1. Electric Drill or Drill Press.
2. Drill Bits 1.5 to 9mm Diameter.
3. Hacksaw.
4. Angle Grinder.
6. Bench Grinder.
7. Hammer.
8. Set square.
9. 14.2mm (9/16) Taper Pin Reamer.
10. Taper Cutting Tool.
11. Countersink Tool.
12. Large Vice.

Tubes required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2

1. 30x30x2mm Upper Receiver
2. 30x30x.16mm Lower Receiver
3. 14.29x3.25mm Barrel (SMT)*
4.12.70x2.03mm Breech Block (SMT/SHT/ERW)*
5. 25.40x12.70x1.6mm Magazine
6. 12.70x0.91mm Magazine
7. 34.93x15.88x1.6mm Magazine Well
8. 40x20x1.6mm Grip
9. 50.80x1.6mm Trigger Guard

* Seamless Mechanical / Seamless Hydraulic/ Electric Resistance Welded.

Other materials required to build a SMG machine gun pistol as described in Expedient Homemade Firearms Vol 2

1. 3"x2"x1/8" Steel Plate Trigger.
2. 10mm Hexagon Wrench/Key Sear.
3. 1/2 Shalf Lock Collars x 14.
6. 5.5mm dia' Steel Rod x24" long (or 7/32")
7. 19.05x5mm Flat Bar x 25" long (or 3/4x3/16)
8. 3mm dia' Steel Rod x 5 1/2" long (or 1/8")
9. 9.5X1.6mm Steel Strip (Sheet) x 6" long (or 3/8" x 1/16")
10. 19.05 x 9.5 Flat Bar x 9" long (or 3/4 x 3/8")
11. 20 Gauge Piano Wire (Music Wire) Purchase several rolls.
12. 18 Gauge x 7/16" Spring Steel Strip, 12" long.
13. 20 Gauge x 1/2" Spring Steel Strip, 8" long.
14. 6mm dia' Socket Screws (x11) 9mm long (or 1/4" x 3/8")

http://www.instructables.com/id/25MM-Pneumatic-Sniper-Rifle/
!!!

http://www.xinventions.com/main/spud/home.htm

A homemade SMG in action:

https://www.youtube.com/watch?v=Dj6VfXDq0qY

https://www.youtube.com/watch?v=ZWVh5iJEi_8
http://www.instructables.com/group/homemadeguns/?show=INSTRUCTABLES...

http://demonoid.cc/files/?category=11&subcategory=0&languag...

OR

http://demonoid.cc/files/?category=6&seeded=0&external=2&am...

http://www.ronpaulforums.com/showthread.php?p=1932940

http://www.scribd.com/doc/4483892/Weapons-Expedient-Homemade-Arms-T...

http://www.abovetopsecret.com/forum/thread342215/pg1

http://isohunt.com/torrent_details/13431221/Homemade+Weapons?tab=su...

http://www.roguesci.org/theforum/archive/index.php/f-10.html

Favorite

7 members favorited this

Replies to This Discussion

Permalink Reply by TheLasersShadow on August 22, 2009 at 2:26am

**smacks head** in America you shouldn't ever have to consider this due to availability... as well as knowing that a good dry wall hammer or a knife are easily bought at a store.

Permalink Reply by Joe Green on December 26, 2009 at 7:40pm

My brother-in-law is an expert gunsmith and has built several guns. I am hoping I can get him to build a 50 Cal. rifle, here in Arizona.

Permalink Reply by youhavetoforgiveme on January 7, 2010 at 7:14pm

1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat.

Permalink Reply by Billy1st III% on July 23, 2010 at 8:54pm

Is doable!

youhavetoforgiveme said:

1. Plant framing hammer into enemy guard's skull at high speed.
2. Take his gun(s) and other gear.
3. Repeat.

Permalink Reply by Che Lenin on November 23, 2010 at 9:53pm

Yea well in canada they are making it difficult to obtain even just a hunting rifle.

Permalink Reply by Metalchemist on October 22, 2011 at 8:58pm

Don't forget about all the great throwing axes available now.

A bit of practice (as in just about everything) and you're more than competant.

Permalink Reply by Cryptocurrency on October 8, 2012 at 3:19am

Wooohoooo!! WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!!!

Permalink Reply by Mr Chicken on January 12, 2013 at 5:57pm

Imagine what a self contained nail gun will go for when the fit hits the shan... Adjust the trigger guard and you have a nice nail shooter. Who hasn't played with their own framing nail gun?

Permalink Reply by david james on November 15, 2017 at 7:18pm